-
Ποδήλατα
add remove
-
E-Bikes
add remove E-Bikes add remove
- E-bikes MTB add remove
- Τροχοί add remove
-
Τρίαθλο
add remove
- Triathlon add remove
-
MTB
add remove
- E-bikes MTB add remove
- Enduro MTB add remove
- E-bikes Ladies add remove
- Ladies MTB add remove
- Διατροφή
- Ανταλλακτικά add remove
- Αξεσουάρ add remove
-
Ένδυση
add remove
- Wetsuits add remove
- Tri Accessories add remove
- Εκπτώσεις add remove
- Επικοινωνία
Κωδικός: 2306028
- Write a review
FSA MTB M3 BB30 to MegaExo Bottom Bracket - Closeout BB-CFMM3/68
This steel bottom bracket allows for use of FSA mountain bike cranks with MegaExo 24 mm axles in BB30 bottom bracket housings.
16 ακόμα προϊόντα στην ίδια κατηγορία:
FSA BB92 Cups BB-ALM92/SLE/CZ
Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel
Shimano Dura Ace BB-R9100 Bottom Bracket
Shimano Dura Ace BB-R9100 Road Bicycle Bottom Bracket BC1.37 x24 68mm Road
Campagnolo Ultra Torque OS-Fit 68x42 BB Cups...
Bottom bracket cups for the installation of Campagnolo and Fulcrum Ultra Torque cranksets at frames with oversize bottom bracket shells. These specific adapters are made of aluminium and have the same bearing seat function as the already renowned Ultra Torque threaded cups. The adapters simply replace the standard cups on frames with oversize bottom bracket shells. The adapters are about 20 grams lighter than standard cups.
SRAM GXP BSA Bottom Bracket
The GXP system does not rely on a lateral load to adjust the bearing clearance as other systems do, but the left bearing is clamped between the bottom bracket axle and the left crank arm. This allows the right-hand bearing to move axially freely on the bottom bracket axle. This prevents premature bearing wear.
FSA BB-CF86/SLE/CZ
Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side