Ανταλλακτικά

SHIMANO ULTEGRA - Bottom Bracket - Press Fit - HOLLOWTECH II - 86.5 mm shell width

With reliable SHIMANO bearings and seals, the SHIMANO ULTEGRA bottom bracket has a long service life.

Κασέτα Shimano Ultegra CS-R8000 11 ταχυτήτων, 11-30T

Superior choice is at the heart of Shimano's rider-tuned philosophy

Included in delivery: sprocket with aluminium lock ring

Material: steel, aluminium

Weight supplement: 11-25 teeth

Front chainring type: Double

Includes 2 Chainrings:
50T-MA
34T-MA 

SHIMANO DXR - Single BMX Sprocket

Built for the demands of BMX racing, the MX66 single speed cassette cogs are compatible with SHIMANO MX70, MX66 BMX hubs as well as other SHIMANO-compatible hubs.

Shimano Dura Ace BB-R9100 Road Bicycle Bottom Bracket BC1.37 x24 68mm Road

Δίσκος με τεχνολογία Ice Technologies Freeza συμβατός με κέντρα Center Lock και με άξονες Q/R και Thru Axle 12-15-20mm. Στη συσκευασία περιλαμβάνεται LOCK RING που είναι συμβατό με κέντρα τροχών THRU AXLE και Q/R.

6 Bolt Rotor
3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all steel rotors

Centre-Lock
Shimano SLX Centre lock SM-RT67 rotors give excellent performance using the proven Shimano Centre-Lock system providing excellent rigidity and security with an easy set-up.

Brake lever set, BL-M421-L, black w/t-type cable 800X900, 1400X1600mm black outer, ind.pack

FSA JIS Crank Bolts.

Features:

8mm CrMo bolt for JIS 2-degree square taper crank, sold in pairs

Self-extracting bolts: includes puller cap that threads into most crank arms. 72g/pr

Non-extracting bolts: 8mm hex fitting, 70g/pr

Specs:

Fits: JIS (self-extracting)

Bolt Size: M8

This steel bottom bracket allows for use of FSA mountain bike cranks with MegaExo 24 mm axles in BB30 bottom bracket housings.

FSA Crank Arm Fixing Bolts

Requires 8mm hex wrench, includes washers

FSA Torx T30 chainring bolt set made of cold forged 7075-T6 aluminum. Suitable for FSA K-Force Light 386 3-Arm 2-speed cranks. Incl. tool.

Material: aluminium

The FSA Carbon SL Headset Spacer is a super light carbon spacer for tuning stem height on 1-1/8" steerer tubes. Spacers are internally weight relieved to drop a few extra gram and logo branded on the exterior.

160-4326
H2373

Contains one brake pad pair plus holders

Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel

BB92 Bottom Bracket for carbon SL-K MTB cranksets.

Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).

Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side

The Cervelo Replacement Derailleur Hanger for Rim Brake Frames allows you to replace your derailleur hanger should you damage it in a crash or in transit.

This genuine replacement part fits all current Cervelo rim brake frames.

Length: 125mm

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

The Cervelo Internal Di2 Mount for S5 is a replacement Di2 battery mount for internally mounting a Shimano Di2 battery within an S5 downtube. The mount is only compatible with Cervelo S5 seatposts for 2014 onwards models.