Ανταλλακτικά
Ανταλλακτικά και εξαρτήματα Shimano, Campagnolo, FSA, κεραμικά ρουλεμάν Ceramic Speed, βατόμετρα Stage Cycling και Favero Assioma, πετάλια Look.
Υπάρχουν 81 προϊόντα.
Liv Contact SL Handlebar Tape Black
- Non-slip PU surface embossed with the Liv logo
- EVA foam base absorbs shock and increases comfort
- Includes Liv end-plugs and finishing tape
- 2.5mm thick
Liv Contact Handlebar Tape Black
Liv Contact Gel Handlebar Tape reduces road vibration using gel with a non-slip suede effect Giant embossed finish, weighing just 56g.
- Non-slip suede surface embossed with the Liv logo
- EVA foam base absorbs shock and increases comfort
- Includes Liv end-plugs and finishing tape
- 2.0mm thick
Liv Approach Saddle
A saddle doesn’t just carry you from point A to point B, it has to meet the intimate needs of individual riders. Liv's Approach saddle delivers ultimate satisfaction when your sit bones are under pressure, regardless of the length of your journey or experience level. With a strategically placed, ergonomic cut-out and supportive yet cozy design structures, the Approach saddle relieves pain, pressure, and chafing for the comfortable support you need to tackle century rides or back-to-back training rides.
FSA QR-1 JIS Crank Bolts (M8) (Self-Extracting)
FSA JIS Crank Bolts.
Features:
8mm CrMo bolt for JIS 2-degree square taper crank, sold in pairs
Self-extracting bolts: includes puller cap that threads into most crank arms. 72g/pr
Non-extracting bolts: 8mm hex fitting, 70g/pr
Specs:
Fits: JIS (self-extracting)
Bolt Size: M8
FSA MTB M3 BB30 to MegaExo Bottom Bracket -...
This steel bottom bracket allows for use of FSA mountain bike cranks with MegaExo 24 mm axles in BB30 bottom bracket housings.
FSA M12 Capless Chromoly Crank Bolts
FSA Crank Arm Fixing Bolts
Requires 8mm hex wrench, includes washers
FSA Chainring Bolt Set for K-Force Light 386...
FSA Torx T30 chainring bolt set made of cold forged 7075-T6 aluminum. Suitable for FSA K-Force Light 386 3-Arm 2-speed cranks. Incl. tool.
Material: aluminium
FSA Carbon SL Headset Spacer (1-1/8") (Single)...
The FSA Carbon SL Headset Spacer is a super light carbon spacer for tuning stem height on 1-1/8" steerer tubes. Spacers are internally weight relieved to drop a few extra gram and logo branded on the exterior.
160-4326
H2373
FSA Brake Pads And Holder for Gossamer Brakeset
Contains one brake pad pair plus holders
FSA BB92 Cups BB-ALM92/SLE/CZ
Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel
FSA BB92 Composite Cups BB-CFM92/SLE/CZ
BB92 Bottom Bracket for carbon SL-K MTB cranksets.
FSA BB92 Composite Cups BB-ALM92/19/SLE/CZ
Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).
FSA BB-CF86/SLE/CZ
Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side
Cervelo Νύχι Σασμάν
The Cervelo Replacement Derailleur Hanger for Rim Brake Frames allows you to replace your derailleur hanger should you damage it in a crash or in transit.
This genuine replacement part fits all current Cervelo rim brake frames.
Cervélo S3 Stem (Demo)
Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.
Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.
Cervélo S3 Stem
Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.
Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.
Cervélo Internal Di2 Mount For S5
The Cervelo Internal Di2 Mount for S5 is a replacement Di2 battery mount for internally mounting a Shimano Di2 battery within an S5 downtube. The mount is only compatible with Cervelo S5 seatposts for 2014 onwards models.
Cervelo AB08 Aero Bar Extension Kit for S5
he Cervelo AB08 Aero Bar Extension Kit for S5 is perfect for riders looking to transform their favourite aero road bike into a dedicated time trialling machine. This is a genuine accessory from Cervelo, machined to fit the Cervelo AB08 handlebar and CS28 V-Stem perfectly.
The kit contains comfortable elbow pads as well as all the hardware you need to connect them to your proprietary S5 handlebar. It does not include bar extensions, leaving the rider free to choose their preferred shape in a separate purchase.
Included: Fixing brackets, elbow pads, hardware.
Please note: Compatible with third-generation Cervelo S5 (2019 - 2020) cockpits only.
Cadex Wheel Bag Black ΜΟΝΗ τσάντα τροχών
Contains 1 wheel bag
Cadex Titanium Road Skewers Quick Release Set
Lightweight titanium quick release skewers for CADEX WheelSystems. Comes in a two pack for front and rear wheels. Please note this is only compatible with CADEX rim brake wheels.
CADEX Race Tubeless Tyre
Designed for peak race performance, CADEX Race Tubeless tires have won over the pros through their superior speed, ultra-light weight and supple ride feel.
Cadex Race Stem
The perfect pairing with a CADEX Road or All-Road/Gravel Handlebar, the CADEX Race Stem features a unique two-bolt faceplate and hidden top cap design to maximize aerodynamic efficiency at your bike’s critical leading edge. Available in a wide range of sizes to assure optimal fit.
Cadex Race Handlebar Tape
Lightweight CADEX Race handlebar tape features a tacky but refined PU compound finish for nonslip grip even in wet conditions and high-density foam for outstanding shock-absorption over long rides.
CADEX Race Handlebar
With a jaw-dropping weight of only 160g for a 420mm bar, the CADEX Race Handlebar delivers a clear competitive advantage with zero compromises in comfort and control. A cutting-edge one-piece moulding process eliminates the flex found in traditional bonded handlebars and produces a feel that’s stiff yet compliant. Unbeatable all-rounder performance for sprinting, climbing and cornering—all day long.