Simple, sturdy bike carrying system.

Soft Cushion leg pads protect vehicles.

Carries 2 bikes up to 30kgs weight limit.

Easy Install Design, No Drilling Required.

Suitable for almost all car styles.

Folds in seconds for easy storage.

Secured by Adjustable Straps.

Our Vintage bottle-cage is a memory of Zéfal history. Timeless, it’s ideal for old bikes or today’s fixies.

Sleekest, low profile bag offered on the market

Bolt mounted so your storage will not budge!

Super Slide zipper allows for quick easy access

Can hold up to 5 gels.

Maintains aero shape with included aero stiffener

Softest race belt you have ever worn!

Belt stays put for maximum comfortability

Simple snaps for easy pinning

Wide adjustable range for most body sizes

7.5/6.5/5.5mm  x1
4.5/2.5mm        x2

7.5/6.5/5.5mm  x1
4.5/2.5mm        x2

7075-T6
1/2" x 3/32"
BCD: 104mm
32t

7075-T6
1/2" x 3/32"
BCD: 104mm
34t

7075-T6
1/2" x 1/8"
BCD: 104mm
34t

7075-T6
1/2" x 1/18"
BCD: 104mm
32t

The GXP system does not rely on a lateral load to adjust the bearing clearance as other systems do, but the left bearing is clamped between the bottom bracket axle and the left crank arm. This allows the right-hand bearing to move axially freely on the bottom bracket axle. This prevents premature bearing wear.

SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit™ bottom brackets would be combined into one captivating package. Pressfit 30™ will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30™ is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets.

Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30™ for road will require a 68mm wide shell while Pressfit 30™ for MTB will require a 73mm wide shell.

SHIMANO ULTEGRA - Bottom Bracket - Press Fit - HOLLOWTECH II - 86.5 mm shell width

With reliable SHIMANO bearings and seals, the SHIMANO ULTEGRA bottom bracket has a long service life.

SHIMANO DXR - Single BMX Sprocket

Built for the demands of BMX racing, the MX66 single speed cassette cogs are compatible with SHIMANO MX70, MX66 BMX hubs as well as other SHIMANO-compatible hubs.

Shimano Dura Ace BB-R9100 Road Bicycle Bottom Bracket BC1.37 x24 68mm Road

Δίσκος με τεχνολογία Ice Technologies Freeza συμβατός με κέντρα Center Lock και με άξονες Q/R και Thru Axle 12-15-20mm. Στη συσκευασία περιλαμβάνεται LOCK RING που είναι συμβατό με κέντρα τροχών THRU AXLE και Q/R.