Ανταλλακτικά

This steel bottom bracket allows for use of FSA mountain bike cranks with MegaExo 24 mm axles in BB30 bottom bracket housings.

The FSA Carbon SL Headset Spacer is a super light carbon spacer for tuning stem height on 1-1/8" steerer tubes. Spacers are internally weight relieved to drop a few extra gram and logo branded on the exterior.

160-4326
H2373

Contains one brake pad pair plus holders

Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel

BB92 Bottom Bracket for carbon SL-K MTB cranksets.

Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).

Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side

The Tractor XL sprocket is made from 6061-alloy with a super thick 16mm core diameter that tapers to 6mm thick at the teeth. 

Despite the thicker design, the Tractor XL weighs about the same as traditional sprockets  - 4.0 oz. (25t) and 4.7 oz. (28t) with a 24mm bore (19mm and 22mm spindle adaptors included). 

If there’s one part on your bike you need to trust, it’s your chain, and, do we have a chain for you ! With extra thick 1.3 mm link plates, hardened rollers, premium hollow chromoly pins with an extra strong chromium heat treatment and the convenience of a built in half-link, the bullet proof Tractor chain is about as trustworthy and reliable as its gets.

Keeping things running smoothly down south we bring you the Rotar bottom bracket, a very clean and simple BB system with the highest quality bearings possible, CNC machined 6061 – T6 Aluminum spacers, a Flybikes logo’d spacer, and comes in 19 mm, 22 mm and 24 mm sizes.

1.5 mm & 3 mm washers included for adjustability

• Forged 6061-T6 Aluminum
• Slim and simple no barrel design
• Hinged clamp
• Precision CNC & oversize
• Brass bearings

386EVO crank into a PF30 or BB30 frame

200-3204
MW258A Washer Anodized Black