Ανταλλακτικά

FSA JIS Crank Bolts.

Features:

8mm CrMo bolt for JIS 2-degree square taper crank, sold in pairs

Self-extracting bolts: includes puller cap that threads into most crank arms. 72g/pr

Non-extracting bolts: 8mm hex fitting, 70g/pr

Specs:

Fits: JIS (self-extracting)

Bolt Size: M8

This steel bottom bracket allows for use of FSA mountain bike cranks with MegaExo 24 mm axles in BB30 bottom bracket housings.

FSA Crank Arm Fixing Bolts

Requires 8mm hex wrench, includes washers

FSA Torx T30 chainring bolt set made of cold forged 7075-T6 aluminum. Suitable for FSA K-Force Light 386 3-Arm 2-speed cranks. Incl. tool.

Material: aluminium

The FSA Carbon SL Headset Spacer is a super light carbon spacer for tuning stem height on 1-1/8" steerer tubes. Spacers are internally weight relieved to drop a few extra gram and logo branded on the exterior.

160-4326
H2373

Contains one brake pad pair plus holders

Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel

BB92 Bottom Bracket for carbon SL-K MTB cranksets.

Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).

Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side

The Cervelo Replacement Derailleur Hanger for Rim Brake Frames allows you to replace your derailleur hanger should you damage it in a crash or in transit.

This genuine replacement part fits all current Cervelo rim brake frames.

Length: 125mm

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

The Cervelo Internal Di2 Mount for S5 is a replacement Di2 battery mount for internally mounting a Shimano Di2 battery within an S5 downtube. The mount is only compatible with Cervelo S5 seatposts for 2014 onwards models.

Length: 170mm

Length: 127mm

he Cervelo AB08 Aero Bar Extension Kit for S5 is perfect for riders looking to transform their favourite aero road bike into a dedicated time trialling machine. This is a genuine accessory from Cervelo, machined to fit the Cervelo AB08 handlebar and CS28 V-Stem perfectly.

The kit contains comfortable elbow pads as well as all the hardware you need to connect them to your proprietary S5 handlebar. It does not include bar extensions, leaving the rider free to choose their preferred shape in a separate purchase.

Included: Fixing brackets, elbow pads, hardware.

Please note: Compatible with third-generation Cervelo S5 (2019 - 2020) cockpits only.

Η μεσαία τριβή PF4630 είναι για πλαίσιο PF30, BBright ή 386EVO στο οποίο θέλετε να εγκαταστήσετε άξονα BB30. Έχει εσωτερική διάμετρο 46 mm και λείο εσωτερικό, αν και τα πλάτη ποικίλλουν από 68 mm έως 86 mm. Ο άξονας έχει διάμετρο 30 mm.

Αυτή η μεσαία τριβή έχει σχεδόν μηδενική απώλεια ισχύος λόγω τριβής, χάρη στα ρουλεμάν. Τα ρουλεμάν έχουν εξαιρετικά λεία σφαιρίδια CeramicSpeed ​​που κυλίονται σε ράγες από σκληρυμένο χάλυβα. 

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. The handbuilt OSPW System has two spring tension settings, that allows customised setup based on riding conditions.  

This OSPW System is also compatible with the 2020 11 speed SRAM Red eTap derailleur featuring a clutch. 

In the box:

Complete OSPW System for SRAM Red/Force AXS

CeramicSpeed Oil for Pulley Wheel Bearings, 15 ml. dropper bottle

Custom tool for removal of stock cage and securing of OSPW System. 

The overall power savings of the OSPW System for Shimano Dura Ace 9200 and Ultegra 8100 reach 30%-60%, or more in some cases, over a stock setup.

The oversized pulley wheels have 3-5 times longer lifetime than the commonly used standard pulleys on the market.

The overall power savings of the OSPW System for Shimano 9100/9150 /8000 reach 30%-60%, or more in some cases, over a stock setup.

The oversized pulley wheels have 3-5 times longer lifetime than the commonly used standard pulleys on the market.

The Shimano 9100/9150 and 8000 SS/8050 SS OSPW system is compatible up to a 32 tooth cassette for both Dura Ace & Ultegra derailluers.

Οι μεσαίες τριβές ΒΒ86 είναι συμβατές με τους άξονες Shimano. Το κιτ αποτελείται από δύο κύπελλα που πιέζονται σε κάθε πλευρά του κεντρικού ανοίγματος.

Τα κύπελλα διαθέτουν ρουλεμάν CeramicSpeed. Οι μεσαίες τριβές προσφέρουν χαμηλή οπισθέλκουσα, μεγάλη διάρκειας ζωής, σκληρυμένο χάλυβα και τα εξαιρετικά λεία σφαιρίδια των ρουλεμάν CeramicSpeed για μέγιστη απόδοση. 

386EVO crank into a PF30 or BB30 frame

200-3204
MW258A Washer Anodized Black