Ανταλλακτικά
Ανταλλακτικά και εξαρτήματα Shimano, Campagnolo, FSA, κεραμικά ρουλεμάν Ceramic Speed, βατόμετρα Stage Cycling και Favero Assioma, πετάλια Look.
Υπάρχουν 32 προϊόντα.
Active filters
Shimano Ultegra Hollowtech II Press Fit Bottom...
SHIMANO ULTEGRA - Bottom Bracket - Press Fit - HOLLOWTECH II - 86.5 mm shell width
With reliable SHIMANO bearings and seals, the SHIMANO ULTEGRA bottom bracket has a long service life.
Shimano DXR Single BMX Sprocket 18T
SHIMANO DXR - Single BMX Sprocket
Built for the demands of BMX racing, the MX66 single speed cassette cogs are compatible with SHIMANO MX70, MX66 BMX hubs as well as other SHIMANO-compatible hubs.
Shimano Dura Ace BB-R9100 Bottom Bracket
Shimano Dura Ace BB-R9100 Road Bicycle Bottom Bracket BC1.37 x24 68mm Road
Shimano Disc Brake Rotor Center Lock 140mm...
Δίσκος με τεχνολογία Ice Technologies Freeza συμβατός με κέντρα Center Lock και με άξονες Q/R και Thru Axle 12-15-20mm. Στη συσκευασία περιλαμβάνεται LOCK RING που είναι συμβατό με κέντρα τροχών THRU AXLE και Q/R.
Shimano Disc Brake Rotor 180mm XT
6 Bolt Rotor
3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all steel rotors
Shimano Disc Brake Rotor 180mm SLX
Centre-Lock
Shimano SLX Centre lock SM-RT67 rotors give excellent performance using the proven Shimano Centre-Lock system providing excellent rigidity and security with an easy set-up.
FSA MTB M3 BB30 to MegaExo Bottom Bracket -...
This steel bottom bracket allows for use of FSA mountain bike cranks with MegaExo 24 mm axles in BB30 bottom bracket housings.
FSA Carbon SL Headset Spacer (1-1/8") (Single)...
The FSA Carbon SL Headset Spacer is a super light carbon spacer for tuning stem height on 1-1/8" steerer tubes. Spacers are internally weight relieved to drop a few extra gram and logo branded on the exterior.
160-4326
H2373
FSA Brake Pads And Holder for Gossamer Brakeset
Contains one brake pad pair plus holders
FSA BB92 Cups BB-ALM92/SLE/CZ
Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel
FSA BB92 Composite Cups BB-CFM92/SLE/CZ
BB92 Bottom Bracket for carbon SL-K MTB cranksets.
FSA BB92 Composite Cups BB-ALM92/19/SLE/CZ
Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).
FSA BB-CF86/SLE/CZ
Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side
CONTINENTAL GRAND PRIX 5000S TR TUBELESS...
CONTINENTAL GRAND PRIX 5000S TR TUBELESS...
CONTINENTAL GRAND PRIX 5000 TT TR 700x25-28...
The fastest TT tires you ever had.
CONTINENTAL GRAND PRIX 5000 ALL SEASON TR BEIGE...
CONTINENTAL GRAND PRIX 5000 ALL SEASON TR...
CONTINENTAL COMPETITION TT 28''x25mm 700x25...
Cervélo S3 Stem (Demo)
Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.
Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.
Cervélo S3 Stem
Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.
Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.
Adapter BB386 Crank for PF30/BB30 Frame
386EVO crank into a PF30 or BB30 frame
200-3204
MW258A Washer Anodized Black