Ανταλλακτικά

7.5/6.5/5.5mm  x1
4.5/2.5mm        x2

7.5/6.5/5.5mm  x1
4.5/2.5mm        x2

7075-T6
1/2" x 3/32"
BCD: 104mm
32t

7075-T6
1/2" x 3/32"
BCD: 104mm
34t

7075-T6
1/2" x 1/8"
BCD: 104mm
34t

7075-T6
1/2" x 1/18"
BCD: 104mm
32t

The Cervelo Replacement Derailleur Hanger for Rim Brake Frames allows you to replace your derailleur hanger should you damage it in a crash or in transit.

This genuine replacement part fits all current Cervelo rim brake frames.

Length: 125mm

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

The Cervelo Internal Di2 Mount for S5 is a replacement Di2 battery mount for internally mounting a Shimano Di2 battery within an S5 downtube. The mount is only compatible with Cervelo S5 seatposts for 2014 onwards models.

Length: 170mm

Length: 127mm

Campagnolo 700c Single Road Bike Wheel Bag Holder.

Campagnolo Veloce Ultra-Drive Sprockets
10 speed 13-26T

Bottom bracket cups for the installation of Campagnolo and Fulcrum Ultra Torque cranksets at frames with oversize bottom bracket shells. These specific adapters are made of aluminium and have the same bearing seat function as the already renowned Ultra Torque threaded cups. The adapters simply replace the standard cups on frames with oversize bottom bracket shells. The adapters are about 20 grams lighter than standard cups.