The FSA Carbon SL Headset Spacer is a super light carbon spacer for tuning stem height on 1-1/8" steerer tubes. Spacers are internally weight relieved to drop a few extra gram and logo branded on the exterior.

160-4326
H2373

Contains one brake pad pair plus holders

Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel

BB92 Bottom Bracket for carbon SL-K MTB cranksets.

Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).

Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side

The Tractor XL sprocket is made from 6061-alloy with a super thick 16mm core diameter that tapers to 6mm thick at the teeth. 

Despite the thicker design, the Tractor XL weighs about the same as traditional sprockets  - 4.0 oz. (25t) and 4.7 oz. (28t) with a 24mm bore (19mm and 22mm spindle adaptors included). 

If there’s one part on your bike you need to trust, it’s your chain, and, do we have a chain for you ! With extra thick 1.3 mm link plates, hardened rollers, premium hollow chromoly pins with an extra strong chromium heat treatment and the convenience of a built in half-link, the bullet proof Tractor chain is about as trustworthy and reliable as its gets.

Keeping things running smoothly down south we bring you the Rotar bottom bracket, a very clean and simple BB system with the highest quality bearings possible, CNC machined 6061 – T6 Aluminum spacers, a Flybikes logo’d spacer, and comes in 19 mm, 22 mm and 24 mm sizes.

1.5 mm & 3 mm washers included for adjustability

• Forged 6061-T6 Aluminum
• Slim and simple no barrel design
• Hinged clamp
• Precision CNC & oversize
• Brass bearings

FFWD high quality padded wheelbag to for wheelset (double wheelbag).  Overall padded protection for travel or storage.  Equipped with carry handles with velcro closure and shoulder strap, full zipper with pull tab, internal accessory pocket and axle protection.

FFWD high quality padded wheelbag to for wheelset (double wheelbag).  Overall padded protection for travel or storage.  Equipped with carry handles with velcro closure and shoulder strap, full zipper with pull tab, internal accessory pocket and axle protection.

BRAKE WITH CONFIDENCE!

All FFWD full carbon wheels for rim brakes are supplied with Black Prince brake pads by SwissStop. These brake pads are made off materials which work excellent on carbon brake surface, and should be use on carbon brake surface only.

Are the brake pads for your full carbon wheels worn out? These are no doubt the best brake pads to use.

Note! Always change your brake pads when changing your wheels. Do not use the Black Prince brake pads on aloy brake surface!

Easy to install

Install and transfer your Assioma from one bike to another just like normal pedals, easily and without extra tools. Just screw them on your bike crank arms and you are ready to pedal!

Power meter with sensors on both pedals. The best choice to take full advantage of the real dual-sided measurement.

Easy to install

Install and transfer your Assioma power meter from one bike to another just like normal pedals, easily and without extra tools. Just screw them on your bike crank arms and you are ready to pedal!

Front - 180mm

Rear - 160mm

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

Η μεσαία τριβή PF4630 είναι για πλαίσιο PF30, BBright ή 386EVO στο οποίο θέλετε να εγκαταστήσετε άξονα BB30. Έχει εσωτερική διάμετρο 46 mm και λείο εσωτερικό, αν και τα πλάτη ποικίλλουν από 68 mm έως 86 mm. Ο άξονας έχει διάμετρο 30 mm.

Αυτή η μεσαία τριβή έχει σχεδόν μηδενική απώλεια ισχύος λόγω τριβής, χάρη στα ρουλεμάν. Τα ρουλεμάν έχουν εξαιρετικά λεία σφαιρίδια CeramicSpeed ​​που κυλίονται σε ράγες από σκληρυμένο χάλυβα. 

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. The handbuilt OSPW System has two spring tension settings, that allows customised setup based on riding conditions.  

This OSPW System is also compatible with the 2020 11 speed SRAM Red eTap derailleur featuring a clutch. 

In the box:

Complete OSPW System for SRAM Red/Force AXS

CeramicSpeed Oil for Pulley Wheel Bearings, 15 ml. dropper bottle

Custom tool for removal of stock cage and securing of OSPW System. 

The overall power savings of the OSPW System for Shimano Dura Ace 9200 and Ultegra 8100 reach 30%-60%, or more in some cases, over a stock setup.

The oversized pulley wheels have 3-5 times longer lifetime than the commonly used standard pulleys on the market.

The overall power savings of the OSPW System for Shimano 9100/9150 /8000 reach 30%-60%, or more in some cases, over a stock setup.

The oversized pulley wheels have 3-5 times longer lifetime than the commonly used standard pulleys on the market.

The Shimano 9100/9150 and 8000 SS/8050 SS OSPW system is compatible up to a 32 tooth cassette for both Dura Ace & Ultegra derailluers.

Campagnolo Veloce Ultra-Drive Sprockets
10 speed 13-26T

Bottom bracket cups for the installation of Campagnolo and Fulcrum Ultra Torque cranksets at frames with oversize bottom bracket shells. These specific adapters are made of aluminium and have the same bearing seat function as the already renowned Ultra Torque threaded cups. The adapters simply replace the standard cups on frames with oversize bottom bracket shells. The adapters are about 20 grams lighter than standard cups.

BR-RE700

4 pieces

4 pieces