FSA Torx T30 chainring bolt set made of cold forged 7075-T6 aluminum. Suitable for FSA K-Force Light 386 3-Arm 2-speed cranks. Incl. tool.

Material: aluminium

The FSA Carbon SL Headset Spacer is a super light carbon spacer for tuning stem height on 1-1/8" steerer tubes. Spacers are internally weight relieved to drop a few extra gram and logo branded on the exterior.

160-4326
H2373

Contains one brake pad pair plus holders

Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel

BB92 Bottom Bracket for carbon SL-K MTB cranksets.

Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).

Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side

The Tractor XL sprocket is made from 6061-alloy with a super thick 16mm core diameter that tapers to 6mm thick at the teeth. 

Despite the thicker design, the Tractor XL weighs about the same as traditional sprockets  - 4.0 oz. (25t) and 4.7 oz. (28t) with a 24mm bore (19mm and 22mm spindle adaptors included). 

If there’s one part on your bike you need to trust, it’s your chain, and, do we have a chain for you ! With extra thick 1.3 mm link plates, hardened rollers, premium hollow chromoly pins with an extra strong chromium heat treatment and the convenience of a built in half-link, the bullet proof Tractor chain is about as trustworthy and reliable as its gets.

Keeping things running smoothly down south we bring you the Rotar bottom bracket, a very clean and simple BB system with the highest quality bearings possible, CNC machined 6061 – T6 Aluminum spacers, a Flybikes logo’d spacer, and comes in 19 mm, 22 mm and 24 mm sizes.

1.5 mm & 3 mm washers included for adjustability

• Forged 6061-T6 Aluminum
• Slim and simple no barrel design
• Hinged clamp
• Precision CNC & oversize
• Brass bearings

The Cervelo Replacement Derailleur Hanger for Rim Brake Frames allows you to replace your derailleur hanger should you damage it in a crash or in transit.

This genuine replacement part fits all current Cervelo rim brake frames.

Length: 125mm

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

The Cervelo Internal Di2 Mount for S5 is a replacement Di2 battery mount for internally mounting a Shimano Di2 battery within an S5 downtube. The mount is only compatible with Cervelo S5 seatposts for 2014 onwards models.

Length: 170mm

Length: 127mm

he Cervelo AB08 Aero Bar Extension Kit for S5 is perfect for riders looking to transform their favourite aero road bike into a dedicated time trialling machine. This is a genuine accessory from Cervelo, machined to fit the Cervelo AB08 handlebar and CS28 V-Stem perfectly.

The kit contains comfortable elbow pads as well as all the hardware you need to connect them to your proprietary S5 handlebar. It does not include bar extensions, leaving the rider free to choose their preferred shape in a separate purchase.

Included: Fixing brackets, elbow pads, hardware.

Please note: Compatible with third-generation Cervelo S5 (2019 - 2020) cockpits only.

386EVO crank into a PF30 or BB30 frame

200-3204
MW258A Washer Anodized Black