FSA MTB M3 BB30 to MegaExo Bottom Bracket -...
This steel bottom bracket allows for use of FSA mountain bike cranks with MegaExo 24 mm axles in BB30 bottom bracket housings.
This steel bottom bracket allows for use of FSA mountain bike cranks with MegaExo 24 mm axles in BB30 bottom bracket housings.
The GXP system does not rely on a lateral load to adjust the bearing clearance as other systems do, but the left bearing is clamped between the bottom bracket axle and the left crank arm. This allows the right-hand bearing to move axially freely on the bottom bracket axle. This prevents premature bearing wear.
386EVO crank into a PF30 or BB30 frame
200-3204
MW258A Washer Anodized Black
BB1 ITA
You've decided that your bike's performance features could be enhanced with components selected á la carte — and that you should be able to accomplish this despite the spawn of deviant bottom bracket "standards" that have created component compatibility issues at your local bike shop. Conventional threaded bottom brackets like your Italian-threaded BB shell shouldn't foil plans to upgrade your ride. ROTOR conceived its Universal Bottom Bracket (UBB) concept to eliminate the complicated bottom bracket/crank compatibility challenge that has increasingly frustrated the mechanics at your LBS. The BB1 ITA is the "yes" component to "Is this compatible with my Italian-threaded BB shell with a 24mm axle?"
SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit™ bottom brackets would be combined into one captivating package. Pressfit 30™ will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30™ is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets.
Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30™ for road will require a 68mm wide shell while Pressfit 30™ for MTB will require a 73mm wide shell.
SHIMANO ULTEGRA - Bottom Bracket - Press Fit - HOLLOWTECH II - 86.5 mm shell width
With reliable SHIMANO bearings and seals, the SHIMANO ULTEGRA bottom bracket has a long service life.
Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side
Οι μεσαίες τριβές ΒΒ86 είναι συμβατές με τους άξονες Shimano. Το κιτ αποτελείται από δύο κύπελλα που πιέζονται σε κάθε πλευρά του κεντρικού ανοίγματος.
Τα κύπελλα διαθέτουν ρουλεμάν CeramicSpeed. Οι μεσαίες τριβές προσφέρουν χαμηλή οπισθέλκουσα, μεγάλη διάρκειας ζωής, σκληρυμένο χάλυβα και τα εξαιρετικά λεία σφαιρίδια των ρουλεμάν CeramicSpeed για μέγιστη απόδοση.