Campagnolo Crankset Screws And Bolts

Length: 170mm

SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit™ bottom brackets would be combined into one captivating package. Pressfit 30™ will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30™ is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets.

Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30™ for road will require a 68mm wide shell while Pressfit 30™ for MTB will require a 73mm wide shell.

BB92 Bottom Bracket for carbon SL-K MTB cranksets.

Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.

Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.

The all-new Contact SLR Riser road handlebar is a full-carbon, ergonomically shaped bar that provides maximum stability and stiffness while still guaranteeing maximum compliance. Along with a comfortable shallow drop, the Contact SLR Riser bar also features a 20mm rise to accommodate a wider fit range as well as offer a lower stem stack for a sleeker profile.

Tested and approved by the pro riders of CCC Team, Giant's all-new integrated bar/stem combo brings total aerodymanic integration to new levels. Featuring T2 Beam construction, the Contact SLR Integrated drop bar provides maximum efficiency without compromising on compliance and speed.

The FSA Carbon SL Headset Spacer is a super light carbon spacer for tuning stem height on 1-1/8" steerer tubes. Spacers are internally weight relieved to drop a few extra gram and logo branded on the exterior.

160-4326
H2373

Your bike's aesthetics matter and, to maintain its sleek, elegant look, we've bonded a 3K woven, high-modulus carbon sheet to the outside of a Q ring to reinforce the Q ring´s structure. Carbon fiber's structural properties allow for a more aggressively-machined aluminum section in comparison with a conventional aluminum chainring. 8% lighter with 20% increased stiffness, Q rings Qarbon give you all the benefits of Q rings but with carbon fiber accents to both reduce weight and distinguish your bike as a performance machine inline with your sophisticated tastes.