FSA BB92 Composite Cups BB-ALM92/19/SLE/CZ
Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).
Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).
SHIMANO ULTEGRA - Bottom Bracket - Press Fit - HOLLOWTECH II - 86.5 mm shell width
With reliable SHIMANO bearings and seals, the SHIMANO ULTEGRA bottom bracket has a long service life.
Η μεσαία τριβή PF4630 είναι για πλαίσιο PF30, BBright ή 386EVO στο οποίο θέλετε να εγκαταστήσετε άξονα BB30. Έχει εσωτερική διάμετρο 46 mm και λείο εσωτερικό, αν και τα πλάτη ποικίλλουν από 68 mm έως 86 mm. Ο άξονας έχει διάμετρο 30 mm.
Αυτή η μεσαία τριβή έχει σχεδόν μηδενική απώλεια ισχύος λόγω τριβής, χάρη στα ρουλεμάν. Τα ρουλεμάν έχουν εξαιρετικά λεία σφαιρίδια CeramicSpeed που κυλίονται σε ράγες από σκληρυμένο χάλυβα.
386EVO crank into a PF30 or BB30 frame
200-3204
MW258A Washer Anodized Black
SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit™ bottom brackets would be combined into one captivating package. Pressfit 30™ will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30™ is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets.
Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30™ for road will require a 68mm wide shell while Pressfit 30™ for MTB will require a 73mm wide shell.
BB1 RD BSA
You think that your bike's performance features could be enhanced with components selected á la carte at your local bike shop — and that you should be able to accomplish this despite the spawn of deviant bottom bracket "standards" that have created component compatibility issues. Conventional threaded bottom brackets like your English-threaded BB shell shouldn't foil plans to upgrade your ride. ROTOR conceived its Universal Bottom Bracket (UBB) concept to eliminate the complicated bottom bracket/crank compatibility challenge that has increasingly frustrated the mechanics at your LBS. The BB1 BSA is the "yes" component to "Is this compatible with my English-threaded BB shell with a 24mm axle?"
ROAD BB-PF30 BB-PF6000/CZ/D12
The PF30 standard has been introduced by SRAM. PF30 is a variant of the BB30 design. The PF 30 design uses BB30 size bearings preinstalled in bearing cups. The bearing and cup are pressed into the PF30 bottom bracket shell. Because PF30 uses the same size bearing as a BB30, the cup material increases the bottom bracket shell to 46mm diameter. The PF30 system uses the same diameter spindle as BB30.
Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side