FSA BB92 Cups BB-ALM92/SLE/CZ
Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel
Υπάρχουν 241 προϊόντα.
Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel
BB92 Bottom Bracket for carbon SL-K MTB cranksets.
Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).
Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side
Βάρος 1.520 γραμμάρια
IN SHORT
What's in the box
Βάρος 1.415 γραμμάρια
OUR SPECIAL EDITION POWERSHIFT-READY RYOT44
This wheelset is made to perfectly fit Classified’s Powershift technology, a wireless 2-speed shifting system that allows you to change gears in a split second, under full load, and on any terrain. The POWERSHIFT Hub replaces the functionality of the front derailleur and allows you to ride a 2x in a 1x setup without any compromises.
The RYOT44 is already available in a large number in choice of hubs, but we have added an extra option to this model. Thanks to a partnership with Classified, you can now order the RYOT44 wheels compatible with the revolutionary Powershift rear hub. Searching for the best of both worlds for your bike? With the RYOT44 you opt for maximum effort!
Easy to install
Install and transfer your Assioma from one bike to another just like normal pedals, easily and without extra tools. Just screw them on your bike crank arms and you are ready to pedal!
|Soft touch rapid wicking Italian fabric|coldblack® technology dramatically reduces heat buildup|Skin-fit aerodynamic Lycra® sleeve|Athletic race fit|3 rear pockets|Raw edge silicone sleeve gripper|Full front zipper with sprung puller|
Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.
Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.
Fine tune your bike fit for the Cervelo S3 with this specific S3 Stem with Top Cap. Increasing length in 10mm increments from 80mm to 130mm will let you dial in a perfect reach. This setup is compatible with Bar Fly 4 Direct Max and Bar Fly Direct Mini Garmin stem mounts so that your ride stats are still available at your fingertips. This stem must only be used in conjuction with the HS-A029 headset and HS-A029 stem spacer kit.
Please note that for frame sizes of 48cm and 51cm this stem steerer will need to be cut so that the stem can be placed in the lowest stack position.
The Cervelo Internal Di2 Mount for S5 is a replacement Di2 battery mount for internally mounting a Shimano Di2 battery within an S5 downtube. The mount is only compatible with Cervelo S5 seatposts for 2014 onwards models.
THERMOFLEX LUXURIOUS FLEECY WARMTH
If you don't need the extra wet weather protection of Nano Flex, or if you've always been happy with traditional warmers, you'll find that Castelli's Thermoflex warmers offer the softest, most luxurious fabric combined with careful attention to construction details.
WHAT IT IS
Thermoflex is luxuriously warm and stretchy in dry conditions but is not intended for wet conditions.
Castelli's advanced Nano silicone is coated on these arm warmers for additional water resistance. Nano Flex fabric provides additional protection from the rain with improved flexibility.
These lightweight arm warmers perfectly protect you from sunburn even on tours lasting several hours. The solar polyester fabric quickly wicks moisture away and prevents overheating. An elastic band on upper end, silicone-screened on both sides, keeps them well in place.
Bottom bracket cups for the installation of Campagnolo and Fulcrum Ultra Torque cranksets at frames with oversize bottom bracket shells. These specific adapters are made of aluminium and have the same bearing seat function as the already renowned Ultra Torque threaded cups. The adapters simply replace the standard cups on frames with oversize bottom bracket shells. The adapters are about 20 grams lighter than standard cups.
Spare chainring screws and bolts for Bolts for Super Record, Record, Chorus and Athena Ultra-Torque carbon chainsets (FC-AT300/SR100)
Includes the 4 standard bolts plus the longer arm position bolt with chainring spacer
Black anodised aluminum
Thread lock treated to prevent loosening whilst in use
The Core Short provides lift for the hips and legs while swimming - simulating the lift of a wetsuit, and mimicking the feeling of using a pull-buoy. For triathletes, training with the Core Short will provide a seamless transition to wetsuit swimming in open water- getting you ready for race day. For pool swimmers, the Core Short is essentially a wearable, improved pull-buoy: it improves every swim stroke, allows natural kick and hip rotation, and flip-turns are easier.
Designed with the same top-end materials as our Helix Wetsuits, the Core Short is durable and able to withstand hours of pool and open-water use. It is designed to be worn over a swimsuit.
Sizing is based on Waist Size: XS = 28 , S = 30 , M = 32, L = 34 , XL = 36
Designed for the compatibility with Shimano® road
Assioma Shi has been designed for Shimano® road users, as it offers the opportunity to keep on riding with your current Shimano® pedal bodies* without giving up on the trustability and precision of Assioma.
Installation into your own Shimano® pedal bodies
Installing Assioma Shi into your own compatible Shimano® pedal bodies* is simple and quick.
Designed for the compatibility with Shimano® road
Assioma Shi has been designed for Shimano® road users, as it offers the opportunity to keep on riding with your current Shimano® pedal bodies* without giving up on the trustability and precision of Assioma.
Installation into your own Shimano® pedal bodies
Installing Assioma Shi into your own compatible Shimano® pedal bodies* is simple and quick.
The super-light and breathable Piuma Jersey is for extreme heat and long climbs where low weight, breathability and quick drying are priorities. A double-density mesh on the front gives maximum cooling airflow, while the shoulders and back are a super-light stretch fabric. On the rear, there are three cargo pockets, a zipped security pocket and an eco side pocket.